SFF Optical Transceiver


 

 Features: 

  • Small Form Factor 2X5 Pin Package
  • Duplex LC Single-Mode/Multi-Mode Transceiver
  • Single+3.3V Power Supply, LV-PECL Data Interface
  • Eye Safety, Meet Laser Class1,Compliant with IEC60825-1
  • Operating Temperature from - 40℃to +85℃
  • Compliant with Multi Source Agreement (MSA) 
  • Compliant with Telcordia (Bellcore) GR-468-CORE

http://www.optostar.com.cn/wwwroot/meta/SFF.jpg

 Applications:
  • Fast or Gigabit Ethernet .
  • Fibre channel .
  • Switch to Switch interface
  • File server interface

GBIC Optical Transceiver

 Features: 

  • Single +3.3V or +5V Power Supply
  • Hot-Pluggable Duplex SC Connector
  • Gigabit Ethernet 1000Base-SX/LX/XD/ZX at 1.25Gb/s Optional
  • Eye Safety, Meet Laser Class1, Compliant with IEC60825-1
  • Compliant with Telcordia (Bellcore) GR-468-CORE
  • Compliant with Specifications for IEEE-802.3
  • Compliant with ANSI Spec. for Fiber Channel Applications at 1.06Gb/s

http://www.optostar.com.cn/wwwroot/meta/GBIC.jpg

 Standard Products:
  • Switch to switch interface
  • High speed I/O for file servers
  • Bus extension applications

SFF Optical Transceiver


 

 Features: 

  • Small Form Factor 2X5 Pin Package
  • Duplex LC Single-Mode/Multi-Mode Transceiver
  • Single+3.3V Power Supply, LV-PECL Data Interface
  • Eye Safety, Meet Laser Class1,Compliant with IEC60825-1
  • Operating Temperature from - 40℃to +85℃
  • Compliant with Multi Source Agreement (MSA) 
  • Compliant with Telcordia (Bellcore) GR-468-CORE

http://www.optostar.com.cn/wwwroot/meta/SFF.jpg

 Applications:
  • Fast or Gigabit Ethernet .
  • Fibre channel .
  • Switch to Switch interface
  • File server interface

SFP Copper Transceiver

 

 Features:

  • Up to 1.25Gb/s bi-directional data links
  • Hot-pluggable SFP footprint
  • Extended case temperature range (0°C to +85°C )
  • Fully metallic enclosure for low EMI
  • Low power dissipation
  • Compact RJ-45 connector assembly
  • Detailed product information in EEPROM
  • +3.3V single power supply
  • Access to physical layer IC via 2-wire serial bus
  • 10/100/1000 BASE-T operation in host systems with SGMII interface
  • Compliant with SFP MSA
  • Compliant with IEEE Std 802.3TM-2002
  • Compliant with FCC 47 CFR Part 15, Class B

http://www.optostar.com.cn/wwwroot/meta/RJ-45-SFP-b.gif

 Applications:
  • 1.25 Gigabit Ethernet over Cat 5 cable
  • Switch/Router to Switch/Router Link
  • High speed I/O for file severs
    Optostar’s 1000BASE-T copper SFP transceiver is high performance, cost effective module compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supporting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable. The SFP Copper Module supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modula-tion (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. TheSFP Copper Module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2-wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2-wire serial bus at address ACh.