Managed/Unmanaged Protocol Converters |
|
- E1 to 10/100Mbps Ethernet |
- E1 to V.35 |
| |
Chassis and Standalone type |
|
|
|
|
|
|
|
|
PDH Multiplexer |
|
- 16E1 and 4-ports Eth in one fiber
|
|
|
|
|
|
|
|
|
|
Managed/Unmanaged Media Converters |
|
- WEB and SNMP management
|
- 5km distance on multi mode
|
- 120km distance on single mode
|
|
|
|
|
| |
Digital Video Audio Data Optical Transmitter/Receiver |
- CCTV, video surveillance, homeland security |
- E1 and 100M Ethernet Optional |
- 1 to 64 Channels |
|
|
|
| |
|
|
MPEG- II Video Encoder/Decoder, 1~ 4E1 interfaces |
- Can be integrated easily into your existing analog CCTV system
- Video server and IP camera digitize analog video, audio and data signals, and then send digital motive images directly over an IP network
- Using state-of-the-art H.264 or MPEG4 encoding technology
-Supports Full D1 resolution or 4* CIF resolution
- Max 30 frames/sec @ D1 resolution
- Much better video quality under low bit rate network |
- Embedded Streaming Video and Web Servers
- Digital Video Motion detection and event triggered alarm processing
- PoE function optional for the IP camera
- Dual code rates optional
- Offers duplex transmissions of one video signal, one audio signal and two serial data signals
- you can use industrial surveillance cameras, analogue cameras, surveillance matrix or multiplexer video splitter as input equipments, and either TV or special monitor as displaying equipments. |
|
|
| |
|
HD-SDI/SDI/ASI Optical Transmission System |
|
- SNMP/WEB/Console Management, 19.4Mbps to 1.485Gbps digital video signal over fiber,
with local and remote redundant inputs
- 1+1 remote input redundancy and 1 local input redundancy
- 1 channel bi-directional SDI/ASI digital video signal over a single fiber
|
|
-
Support SMPTE 305M (SDTi)、SMPTE 310M (19.4Mb/s), SMPTE 344M (540Mb/s), M2S and DVB-ASI (270Mb/s) formats for SDI/ASI transmitter and receiver
- Support SMPTE 259M, SMPTE297M, SMPTE305M, SMPTE310M format and up to 1.485Gbps, and DVB-ASI (270Mb/s) formats for HD-SDI transmitter and receiver
- Transmission distance on the fiber is up to 80Km without relay |
|
TDM over IP |
|
- Transmits unframed E1 signal through IP network |
- E1 Number: 1 to 4 channels optional |
- Eth ports: 2, one for downlink, the other for uplink |
- Configured into N X 64K |
- QOS guarantee for E1 information |
|
|
|
|
G.SHDSL Modem |
|
- E1, V.35 or 10/100M Ethernet interfaces integrated |
- One-pair wire or two-pair wire optional |
- Supports dual data port in one device |
- Maximal transmission speed 4.6Mbps |
| |
|
|
|
SDH |
|
- Standalone: 8/16/21/63E1, one Ethernet port |
- Chassis: up to 6 optical ports, 232E1ports |
- Independent ASICS, with 1U single-board |
- 63 X 63 VC12 non-blocking cross-connect |
- Supports tributaries Add/Drop of 1~ 63 E1 |
- 1+1 channel protection |
- Network management platform Fi-View-SDH |
|
|
|
Network Switch (Accesslink) |
|
- IEEE 802.3x Flow Control, IEEE802.1Q VLAN TAG, IEEE802.1p QoS and IEEE802.1D Spanning Tree protocols.
|
- WEB, SNMP and console management
|
- Twist-pair ports support MDI/MDI-X auto-crossover
|
- Port mirroring |
- Manageable with third-party SNMP management |
- 5km on multi mode and 120km on single mode |
|
|
|
Mode Converter |
|
- exchange among
850nm, 1310nm multimode optical port |
- and 1310nm, 1550nm
single mode optical port |
- Supports 155Mbps Optical port. |
- Independent of protocol of the optical port |
|
|
|
|
CWDM Transmission Platform |
|
- Multiplex 8 or 16 CWDM wavelength Channels |
- Different data rates (100M~2.5Gbps) |
- FE, SONET, ATM, OC3, OC12, OC48, 1GbE |
|
|
